Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xii
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Verifying IVR Configuration Using the CLI 13-4
IVR Enhancements by Cisco SAN-OS Release 13-5
IVR Issues 13-6
IVR Licensing Issues 13-6
Cannot Enable IVR 13-7
IVR Network Address Translation Fails 13-8
IVR Zone Set Activation Fails 13-8
Border Switch Fails 13-10
Traffic Does Not Traverse IVR Path 13-11
Link Isolated 13-12
Persistent FC ID for IVR Failed 13-12
LUN Configuration Failure in IVR Zoning 13-13
Host Does Not Have Write Access to Storage 13-13
Locked IVR CFS Session 13-13
CFS Merge Failed 13-14
Troubleshooting the IVR Wizard 13-15
Warning: Not All Switches Are IVR NAT Capable or Are Unmanageable 13-16
Error: The Following Switches Do Not Have Unique Domain IDs 13-16
Error: Pending Action/ Pending Commits 13-17
Error: Fabric Is Changing. Please Retry the Request Later 13-17
CHAPTER
14 Troubleshooting Zones and Zone Sets 14-1
Overview 14-1
Troubleshooting Checklist 14-1
Troubleshooting Zone Configuration Issues with Fabric Manager 14-2
Troubleshooting Zone Configuration Issues with the CLI 14-2
Zone and Zone Set Issues 14-4
Host Cannot Communicate with Storage 14-5
Resolving Host Not Communicating with Storage Issue Using Fabric Manager 14-5
Resolving Host Not Communicating with Storage Using the CLI 14-6
Troubleshooting Zone Set Activation 14-8
Troubleshooting Zone Activation Using Fabric Manager 14-9
Troubleshooting Zone Activation Using the CLI 14-10
Troubleshooting Full Zone Database Synchronization Across Switches 14-11
Resolving Out of Sync Full Zone Database Using Fabric Manager 14-11
Resolving an Out of Sync Full Zone Database Using the CLI 14-11
Mismatched Default Zone Policy 14-12
Resolving Mismatched Default Zone Policies Using Fabric Manager 14-12
Resolving Mismatched Default Zone Policies Using the CLI 14-13
To Next Page
Loading...
Need help?
General