Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xv
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
User Is Not in Any Configured Role 17-10
User Cannot Access Certain Features 17-11
Troubleshooting RADIUS and TACACS+ With Cisco ACS 17-11
CHAPTER
18 Troubleshooting Users and Roles 18-1
Overview 18-1
User Accounts 18-1
Role-Based Authorization 18-2
Rules and Features for Each Role 18-3
Initial Troubleshooting Checklist 18-4
Common Troubleshooting Tools in Fabric Manager 18-4
Common Troubleshooting Commands in the CLI 18-4
User and Role Issues 18-4
User Cannot Log into Switch 18-5
Verifying User Login with System Messages Using Device Manager 18-5
Verifying User Login with System Messages Using the CLI 18-6
User Cannot Create Roles 18-7
User Cannot Create Other Users With Fabric Manager or Device Manager 18-7
User Cannot Access Certain Features 18-8
Verifying Roles Using Device Manager 18-8
Verifying Roles Using the CLI 18-9
User Has Too Much Access 18-10
User Cannot Configure Some VSANs 18-10
Verifying VSAN-Restricted Roles Using Fabric Manager 18-10
Verifying VSAN-Restricted Roles Using the CLI 18-11
User Cannot Configure E Ports 18-11
Unexpected User Displayed in Logs 18-12
Troubleshooting Users and Roles with Cisco ACS 18-12
CHAPTER
19 Troubleshooting FC-SP, Port Security, and Fabric Binding 19-1
FC-SP Overview 19-1
Port Security Overview 19-2
Fabric Binding Overview 19-2
Initial Troubleshooting Checklist 19-2
Common Troubleshooting Tools in Fabric Manager 19-3
Common Troubleshooting Commands in the CLI 19-3
FC-SP Issues 19-4
Switch or Host Blocked from Fabric 19-4
To Next Page
Loading...
Need help?
General