Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xvi
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Verifying FC-SP Configuration Using Fabric Manager 19-5
Verifying FC-SP Configuration Using the CLI 19-5
Verifying Local FC-SP Database Using Fabric Manager 19-5
Verifying Local FC-SP Database Using the CLI 19-6
Authentication Fails When Using Cisco ACS 19-7
Port Security Issues 19-7
Device Does Not Log into a Switch When AutoLearn Is Disabled 19-8
Device Does Not Log into a Switch When Autolearn Is Enabled 19-8
Verifying the Active Port Security Database Using Fabric Manager 19-9
Verifying the Active Port Security Database Using the CLI 19-9
Verifying Port Security Violations Using Fabric Manager 19-10
Verifying Port Security Violations Using the CLI 19-11
Cannot Activate Port Security 19-12
Unauthorized Device Gains Access to Fabric 19-12
Disabling Autolearn Using Fabric Manager 19-13
Disabling Autolearn Using the CLI 19-13
Port Security Settings Lost After Reboot 19-13
Merge Fails 19-14
Configuring Port Security with Autolearn Using Fabric Manager 19-14
Configuring Port Security with Autolearn Using the CLI 19-15
Fabric Binding Issues 19-15
Switch Cannot Attach to the Fabric 19-16
Verifying Fabric Binding Violations Using Fabric Manager 19-16
Verifying Fabric Binding Violations Using the CLI 19-17
Cannot Activate Fabric Binding 19-18
Verifying the Config Fabric Binding Database Using Fabric Manager 19-18
Verifying the Config Fabric Binding Database Using the CLI 19-18
Unauthorized Switch Gains Access to Fabric 19-19
Fabric Binding Settings Lost After Reboot 19-19
Configuring Fabric Binding Using Fabric Manager 19-19
Configuring Fabric Binding Using the CLI 19-20
CHAPTER
20 Troubleshooting IP Storage Services 20-1
Overview 20-1
iSCSI Restrictions 20-2
iSLB Restrictions 20-2
Initial Troubleshooting Checklist 20-3
Common Troubleshooting Tools in Fabric Manager 20-3
Common Troubleshooting Commands in the CLI 20-3
To Next Page
Loading...
Need help?
General