Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xx
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Verifying IPsec Configuration Compatibility Using Fabric Manager 22-6
Verifying IPsec Configuration Compatibility Using the CLI 22-7
Verifying Security Policy Databases Compatibility 22-8
Verifying Interface Status Using Fabric Manager 22-9
Verifying Interface Status Using the CLI 22-9
Verifying Security Associations 22-12
Security Associations Do Not Re-Key 22-15
Clearing Security Associations 22-15
Debugging the IPsec Process 22-15
Debugging the IKE Process 22-15
Obtaining Statistics from the IPsec Process 22-15
CHAPTER
23 Troubleshooting SANTap 23-1
Overview 23-1
Definitions 23-2
Limitations 23-2
Interface Restrictions 23-3
Initial Troubleshooting Checklist 23-3
Common Troubleshooting Tools in Fabric Manager 23-4
Common Troubleshooting Commands in the CLI 23-4
Messages, Logs and Databases 23-6
SANTap Issues 23-6
Host Login Problems 23-7
ITL Problems 23-7
Common Mismatch Problems 23-7
CHAPTER
24 Troubleshooting Digital Certificates 24-1
Overview 24-1
Digital Certificates 24-1
Certificate Authorities 24-1
RSA Key Pairs and Identity Certificates 24-2
Peer Certificate Verification 24-2
CRLs and OCSP Support 24-2
Import and Export Support for Certificates and Associated Key Pairs 24-2
PKI Enrollment Support 24-2
Maximum Limits 24-3
Initial Troubleshooting Checklist 24-3
Common Troubleshooting Tools in Fabric Manager 24-3
Common Troubleshooting Commands in the CLI 24-4
To Next Page
Loading...
Need help?
General