Cisco ASR 9000 Series - Page 103

This example show how to configure a secondary local cookie:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn xconnect group l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn-xc)# p2p rtrA_to_rtrB
RP/0/RSP0/CPU0:router(config-xc-p2p)# neighbor ipv6 1111:2222::cdef pw-id 1
RP/0/RSP0/CPU0:router(config-xc-p2p-pw)# l2tp static local cookie secondary size 8 value
<0x0-0xffffffff> <0x0-0xffffffff>
Related Commands
DescriptionCommand
Enters L2VPN configuration mode.l2vpn, on page 100
Enters p2p configuration submode to configure point-to-point
cross-connects.
p2p, on page 134
Configures cross-connect groups.xconnect group, on page 227
Configures a pseudowire for a cross-connect.neighbor (L2VPN), on page 114
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
89
Point to Point Layer 2 Services Commands
l2tp static