Cisco ASR 9000 Series - Provider Backbone Bridge Commands

Provider Backbone Bridge Commands
The IEEE 802.1ah standard (Ref [4]) provides a means for interconnecting multiple provider bridged networks
inorder to build a large scale end-to-end Layer 2 provider bridged network.
For detailed information about PBB concepts, configuration tasks, and examples, see the Cisco ASR 9000
Series Aggregation Services Router MPLS Layer 3 VPN Configuration Guide.
•
backbone-source-mac, page 387
•
bgp (EVPN), page 389
•
clear mmrp-flood-optimization statistics, page 391
•
clear l2vpn forwarding counters bridge-domain mmrp location, page 392
•
debug mmrp-flood-optimization packets, page 393
•
debug mmrp-flood-optimization protocol , page 395
•
ethernet-segment, page 396
•
evi, page 398
•
evpn, page 400
•
evi (PBB), page 402
•
flushagain, page 404
•
flood-time, page 406
•
identifier, page 407
•
join-time (PBB), page 409
•
interface (EVPN), page 410
•
leaveall-time (PBB), page 412
•
leave-time (PBB), page 413
•
load-balancing-mode, page 415
•
mmrp-flood-optimization, page 417
•
mac-flush mvrp, page 418
•
mode singleton, page 419
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
385