Cisco ASR 9000 Series - Show DCI-Fabric-Interconnect

show dci-fabric-interconnect
To display the DCI fabric tenant interconnect information, use the show dci-fabric-interconnect command
in the EXEC mode.
show dci-fabric-interconnect {auto-configuration-pools | dci-vrf-db [vrf vrfname] | fabric [fabric id |
opflex-session] | fabric-vrf-db [fabric fabric id]}
Syntax Description
Displays auto configuration pool parameters.auto-configuration-pools
Displays DCI VRF database information.dci-vrf-db
Displays DCI VRF database for a specific VRF.
vrf vrf name
Displays fabric information for fabric ID. The range is from 1000
to 9999.
fabric fabric id
Displays opflex session information.opflex-session
Displays fabric VRF database information.fabric-vrf-db
Displays fabric VRF database for a fabric ID.
fabric fabric id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 6.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
148
Point to Point Layer 2 Services Commands
show dci-fabric-interconnect