Cisco ASR 9000 Series Reference Guide

clear mmrp-flood-optimization statistics
To clear the stored MRP protocol statistics on all the pseudowires or a specific pseudowire, use the clear
mmrp-flood-optimization statistics command in the EXEC mode.
clear mmrp-flood-optimization statistics {all| pw pw-ID neighbor}
Syntax Description
Clear the stored MRP protocol
statistics on all the pseudowires.
all
Indicates a specific pseudowire.pw
Indicates the IP address of the
neighbor.
neighbor
Indicates the pseudowire ID.
pw-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 5.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeethernet-services
Examples
The following command shows how to clear the MMRP flood optimization statistics:
RP/0/RSP0/CPU0:router#clear mmrp-flood-optimization statistics all
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
391
Provider Backbone Bridge Commands
clear mmrp-flood-optimization statistics

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model