Cisco ASR 9000 Series Reference Guide

clear l2vpn forwarding table
To clear an L2VPN forwarding table at a specified location, use the clear l2vpn forwarding table command
in EXEC mode.
clear l2vpn forwarding table location node-id
Syntax Description
Clears L2VPN forwarding tables for the specified location.
location node-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to clear an L2VPN forwarding table from a specified location:
RP/0/RSP0/CPU0:router# clear l2vpn forwarding table location 1/2/3/5
Related Commands
DescriptionCommand
Displays forwarding information from the layer2_fib manager
on the line card.
show l2vpn forwarding, on page 170
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
75
Point to Point Layer 2 Services Commands
clear l2vpn forwarding table

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model