Cisco ASR 9000 Series Reference Guide

instance (MSTAG/REPAG)
To enter MSTAG Instance configuration mode or REPAG Instance configuration mode, use the instance
command in MSTAG Interface or REPAG Interface configuration mode respectively.
instance id
Syntax Description
MSTI ID. Range is 0 to 4094.
id
Command Default
None
Command Modes
MST AG interface configuration, REPAG interface configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
An instance ID of 0 represents the IST for the region.Note
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to enter MSTAG Instance configuration submode:
RP/0/RSP0/CPU0:router(config-mstag)# instance 101
RP/0/RSP0/CPU0:router(config-mstag-inst)#
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
515
Multiple Spanning Tree Protocol Commands
instance (MSTAG/REPAG)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model