EasyManuals Logo

Cisco ASR 9000 Series Reference Guide

Cisco ASR 9000 Series
696 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
tunnel key-ignore
To ensure that the decapsulation router skips GRE key validation before accepting the packet, use the tunnel
key-ignore command. To remove the tunnel key ignore feature, use the no form of this command.
tunnel key-ignore
no tunnel key-ignore
Syntax Description
This command has no keywords or arguments.
Command Default
Tunnel key-ignore is disabled.
Command Modes
interface configuration
Command History
ModificationRelease
This command was introduced.Release 5.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Do not configure any key value under GRE tunnel that has tunnel key-ignore feature enabled. This is because
the configured tunnel key overrides the tunnel key-ignore feature. As a result, packets that arrive with configured
key value are accepted and undergo further processing at the decapsulation router, while the remaining packets
without the key value are dropped.
Task ID
OperationTask ID
read, writeinterface
read, writetunnel
Examples
This example shows how to configure the tunnel key-ignore feature at the GRE transmitter and receiver ends:
!Local GRE Interface
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface tunnel-ip 10
RP/0/RSP0/CPU0:router(config-if)#ipv4 address 101.0.9.1 255.255.255.0
RP/0/RSP0/CPU0:router(config-if)# tunnel key-ignore
RP/0/RSP0/CPU0:router(config-if)# tunnel tos 96
RP/0/RSP0/CPU0:router(config-if)# tunnel source Loopback10
RP/0/RSP0/CPU0:router(config-if)# tunnel destination 33.0.9.33
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
47
Generic Routing Encapsulation Commands
tunnel key-ignore

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals