Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

ttl (l2vpn)

To configure Time to Live (TTL) for Pseudowire class, use the ttl command in L2VPN pseudowire class

encapsulation L2TPv3 configuration mode. To disable the TTL configuration, use the no form of this command.

ttl ttl _value

no ttl ttl_value

Syntax Description

The TTL Value. Range is from 1 to 255.

ttl_value

Command Default

None

Command Modes

L2VPN pseudowire class encapsulation L2TPv3 configuration

Command History

ModificationRelease

This command was introducedRelease 4.3.1

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

All L2VPN configurations can be deleted using the no l2vpn command.Note

Task ID

OperationTask ID

read, writel2vpn

Examples

This example shows how to configure TTL:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# l2vpn

RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class kanata01

RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation l2tpv3

RP/0/RSP0/CPU0:router(config-l2vpn-pwc-l2tpv3)# protocol l2tpv3

RP/0/RSP0/CPU0:router(config-l2vpn-pwc-l2tpv3)# ttl 40

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x

225

Point to Point Layer 2 Services Commands

ttl (l2vpn)

Cisco ASR 9000 Series Specifications

General

Cisco ASR 9000 Series Reference Guide

Other manuals for Cisco ASR 9000 Series