show l2vpn mstp port
To display the internal MSTI number and number of ports for each VLAN, use the show l2vpn mstp port
command in EXEC mode.
show l2vpn mstp port [interface type interface-path-id] [msti value]
Syntax Description
(Optional) Displays the MSTP state for the given interface.interface
Interface type. For more information, use the question mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional) Displays the filter for Multiple Spanning Tree Instance (MSTI). The
range is from 0 to 100.
msti value
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readl2vpn
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
585
Multiple Spanning Tree Protocol Commands
show l2vpn mstp port
To Next Page
Loading...
