show l2vpn xconnect
To display brief information on configured cross-connects, use the show l2vpn xconnect command in EXEC
mode.
show l2vpn xconnect [brief| detail| encapsulation| group| groups| interface| location| mp2mp| mspw|
neighbor| pw-class| pw-id| standby| state| summary| | pw-id value| type]
Syntax Description
(Optional) Displays encapsulation brief information.brief
(Optional) Displays detailed information.detail
(Optional) Filters on encapsulation type.encapsulation
(Optional) Displays all cross-connects in a specified group.group
(Optional) Displays all groups information.groups
(Optional) Filters on interface and subinterface.interface
(Optional) Displays location specific information.location
(Optional) Displays MP2MP information.mp2mp
(Optional) Displays MSPW information.mspw
(Optional) Filters on neighbor.neighbor
(Optional) Filters on pseudowire classpw-class
(Optional) Displays standby node specific information.standby
(Optional) Filters the following xconnect state types:
•
up
•
down
•
unresolved
state
(Optional) Displays AC information from the AC Manager database.summary
(Optional) Displays the filter for the pseudowire ID. The range is from 1 to
4294967295.
pw-id value
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
203
Point to Point Layer 2 Services Commands
show l2vpn xconnect
To Next Page
Loading...
