Cisco ASR 9000 Series - Instance (MSTP)

instance (MSTP)
To enter the multiple spanning tree instance (MSTI) configuration submode, use the instance command in
MSTP configuration submode.
instance id
Syntax Description
MSTI ID. Range is 0 to 4094.
id
Command Default
None
Command Modes
MSTP configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
An instance ID of 0 represents the CIST for the region.Note
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to enter the MSTI configuration submode:
RP/0/RSP0/CPU0:router(config-mstp)# instance 101
RP/0/RSP0/CPU0:router(config-mstp-inst)#
Related Commands
DescriptionCommand
Enables debugging for sent and received MSTP packets.debug spanning-tree mst packet, on page 479
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
517
Multiple Spanning Tree Protocol Commands
instance (MSTP)