Cisco ASR 9000 Series Reference Guide

show evpn ethernet-segment
To display the EVPN Ethernet segment information, use the show evpn ethernet-segment command in the
EXEC mode.
show evpn ethernet-segment[detail | esi | interface | location | private | standby ]
Syntax Description
Displays detailed information.detail
Filters by Ethernet Segment identifier.esi
Filters by interface name.interface
Displays location specific information.location
Displays private information.private
Displays standby node specific information.standby
Command Default
None.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
This sample output shows the EVPN Ethernet segment with interface filter:
RP/0/RSP0/CPU0:router#show evpn ethernet-segment interface gigabitethernet 0/3/0/0 detail
Ethernet Segment Id Interface Nexthops
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
433
Provider Backbone Bridge Commands
show evpn ethernet-segment

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model