Cisco ASR 9000 Series Reference Guide

show l2vpn trace
To display trace data for L2VPN, use the show l2vpn trace command in EXEC mode.
show l2vpn trace [checker| file| hexdump| last| location| reverse| stats| tailf| unique| usec| verbose| wide|
wrapping]
Syntax Description
Displays trace data for the L2VPN Uberverifier.checker
Displays trace data for the specified file.file
Display traces data in hexadecimal format.hexdump
Display last <n> entrieslast
Displays trace data for the specified location.location
Display latest traces firstreverse
Display trace statisticsstats
Display new traces as they are addedtailf
Display unique entries with countsunique
Display usec details with timestampusec
Display internal debugging informationverbose
Display trace data excluding buffer name, node name, tidwide
Display wrapping entrieswrapping
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
200
Point to Point Layer 2 Services Commands
show l2vpn trace

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model