forward-delay
To set the forward-delay parameter for the bridge, use the forward-delay command in MSTP configuration
submode.
forward-delay seconds
Syntax Description
Bridge forward delay time in seconds. Range is 4 to 30.
seconds
Command Default
seconds: 15
Command Modes
MSTP configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to set the forward-delay parameter for the bridge to 20:
RP/0/RSP0/CPU0:router(config-mstp)# forward-delay 20
Related Commands
DescriptionCommand
Enables debugging for sent and received MSTP packets.debug spanning-tree mst packet, on page 479
Enables debugging protocol-state changes such as port role
or state changes, topology change notification.
debug spanning-tree mst protocol-state, on
page 481
Enters the MSTP configuration submodespanning-tree mst, on page 623
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
503
Multiple Spanning Tree Protocol Commands
forward-delay
To Next Page
Loading...
