Cisco ASR 9000 Series Reference Guide

show l2vpn bridge-domain pbb
To display the provider backbone bridge details, use the show l2vpn bridge-domain pbb command in EXEC
mode.
show l2vpn bridge-domain pbb {core [brief| detail| hardware| private]| edge [brief| core-bridge| detail|
hardware| private]| i-sid service-id [brief| detail| hardware| private]}
Syntax Description
Displays the PBB core.core
Displays the PBB edge.edge
Displays the service instance identifier.i-sid
Service ID.
service-id
Displays brief information about the PBB core, edge or service instance
identifier.
brief
Displays detailed information about the PBB core, edge or service instance
identifier.
detail
Displays hardware information.hardware
Displays private information about the PBB core, edge or service instance
identifier.
private
Displays the name of the core-bridge domain connected to the edge-bridge
domain.
core-bridge
Command Default
None
Command Modes
l2vpn
Command History
ModificationRelease
This command was introduced.Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
442
Provider Backbone Bridge Commands
show l2vpn bridge-domain pbb

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model