Cisco ASR 9000 Series Reference Guide

show l2vpn collaborators
To display information about the state of the interprocess communications connections between l2vpn_mgr
and other processes, use the show l2vpn collaborators command in EXEC mode.
show l2vpn collaborators
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows sample output for the show l2vpn collaborators command:
RP/0/RSP0/CPU0:router# show l2vpn collaborators
L2VPN Collaborator stats:
Name State Up Cnts Down Cnts
-------------------- ---------- ----------- -----------
IMC Down 0 0
LSD Up 1 0
This table describes the significant fields shown in the display.
Table 3: show l2vpn collaborators Field Descriptions
DescriptionField
Abbreviated name of the task interacting with
l2vpn_mgr.
Name
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
163
Point to Point Layer 2 Services Commands
show l2vpn collaborators

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model