vlan-ids (MSTAG/REPAG)
To associate a set of VLAN IDs with the current MSTI, use the vlan-id command in MSTAG or REPAG
instance configuration submode.
vlan-id vlan-range [ vlan-range ] [ vlan-range ] [ vlan-range ]
Syntax Description
List of VLAN ranges in the form a-b, c, d, e-f, g etc.
vlan-range
Command Default
None
Command Modes
MSTAG Instance configuration mode, REPAG Instance configuration mode.
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to use the vlan-id command:
RP/0/RSP0/CPU0:router(config-mstag-inst)# vlan-id 2-1005
Related Commands
DescriptionCommand
Enables MSTAG packet debugging.debug spanning-tree mstag packet, on page
483
Enables Resilient Ethernet Protocol (REP) Access Gateway
debugging commands.
debug spanning-tree repag packet, on page
493
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
643
Multiple Spanning Tree Protocol Commands
vlan-ids (MSTAG/REPAG)
To Next Page
Loading...
Need help?
General
