Cisco ASR 9000 Series Reference Guide

show evpn evi ead
To display the EVPN E-VPN ID information, use the show evpn evi ead command in the EXEC mode.
show evpn evi ead detail
Syntax Description
Specifies the EVPN Instance Identifier. This is used to derive the default Route
Distinguisher and Route Targets.
evi
Specifies the EVPN ead routes.ead
Displays detailed information.detail
Command Default
None.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 6.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
This sample output shows the EVPN EVI detailed information:
RP/0/RSP0/CPU0:router#show evpn evi ead detail
Mon Apr 18 13:19:44.311 EDT
EVI Ethernet Segment Id EtherTag Nexthop Label
----- ------------------------ -------- --------------------------------------- --------
1 00a1.a2a3.a4a5.a6a7.a8a9 0 :: 24006
2.2.2.2 24007
Source: Local, Remote, MPLS, VXLAN
1 00a1.a2a3.a4a5.a6a7.a8a9 ffffffff 2.2.2.2 0
Source: Remote, Unknown encap
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
144
Point to Point Layer 2 Services Commands
show evpn evi ead

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model