Cisco ASR 9000 Series - Show Spanning-Tree Mst Configuration

show spanning-tree mst configuration
To display the VLAN ID to MSTI mapping table, use the show spanning-tree mst configuration command
in the EXEC mode.
show spanning-tree mst protocol instance identifier configuration
Syntax Description
String of a maximum of 25 characters that identifies the protocol
instance.
protocol instance identifier
Displays a summary of MST related configuration.configuration
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readinterface
Examples
The following example shows the output from the show spanning-tree mst command, which displays the
VLAN ID to MSTI mapping table:
RP/0/RSP0/CPU0:router# show spanning-tree mst a configuration
Name leo
Revision 2702
Config Digest 9D-14-5C-26-7D-BE-9F-B5-D8-93-44-1B-E3-BA-08-CE
Instance Vlans mapped
-------- -------------------------------
0 1-9,11-19,21-29,31-39,41-4094
1 10,20,30,40
------------------------------------------
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
594
Multiple Spanning Tree Protocol Commands
show spanning-tree mst configuration