show l2vpn resource
To display the memory state in the L2VPN process, use the show l2vpn resource command in EXEC mode.
show l2vpn resource
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readl2vpn
Examples
The following example shows sample output for the show l2vpn resource command:
RP/0/RSP0/CPU0:router# show l2vpn resource
Memory: Normal
describes the significant fields shown in the display.Table 5: show l2vpn resource Command Field Descriptions,
on page 199
Table 5: show l2vpn resource Command Field Descriptions
DescriptionField
Displays memory status.Memory
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
199
Point to Point Layer 2 Services Commands
show l2vpn resource
To Next Page
Loading...
