Cisco ASR 9000 Series - Page 212

Generic-interface-list: ifl1 (id: 1)
Gi0/2/0/1, in bundle BE3, state: Up, replication: success
Gi0/2/0/0, in bundle BE5, state: Up, replication: success
Gi0/2/0/2, in bundle BE5, state: Up, replication: success
Gi0/2/0/3, state: Up, replication: success
Interface: PW-IW1 Interface State: Up, Admin state: Up
Interface handle 0x20000070
MTU: 1514
BW: 10000 Kbit
VC-type: 11
CW: N
Generic-interface-list: ifl2 (id: 2)
Gi0/3/0/1, in bundle BE6, state: Up, replication: success
Gi0/3/0/0, in bundle BE6, state: Up, replication: success
Gi0/3/0/2, state: Up, replication: success
Gi0/3/0/3, state: Up, replication: success
This example show the sample output for show l2vpn pwhe summary command:
RP/0/RSP0/CPU0:router# show l2vpn pwhe summary
Number of PW-HE interface: 1600
Up: 1300 Down: 300 Admindown: 0
Number of PW-Ether interfaces: 900
Up: 700 Down: 200 Admindown: 0
Number of PW-IW interfaces: 700
Up: 600 Down: 100 Admindown: 0
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
198
Point to Point Layer 2 Services Commands
show l2vpn pwhe