Cisco ASR 9000 Series Reference Guide

show l2vpn protection main-interface
To display an overview of the main interface or instance operational information, use the show l2vpn protection
main-interface command in EXEC mode.
show l2vpn protection main-interface [interface name{Interface}] [brief| detail| location| private| standby]
Syntax Description
Interface name of the Ethernet ring G.8032 name.
interface name
The forwarding interface ID in number or in
Rack/Slot/Instance/Port format as required.
interface
Brief information about the G.8032 ethernet ring
configuration.
brief
Information in detail about the G.8032 ethernet
ring configuration.
detail
Location specific informationlocation
Private information about the G.8032 ethernet ring
configuration.
private
Standby node specific information.standby
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.1.0
The keywords location and standby were added.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
358
Multipoint Layer 2 Services Commands
show l2vpn protection main-interface

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model