Cisco ASR 9000 Series Reference Guide

debug l2vpn forwarding platform vpls all location
To display debugging information about L2VPN forwarding Virtual Private LAN Service (VPLS) platform
of a specified location, use the debug l2vpn forwarding platform vpls all location command in EXEC
mode. To disable debugging, use the no form of this command.
debug l2vpn forwarding platform vpls all location location
no debug l2vpn forwarding platform vpls all location location
Syntax Description
Location to dispaly debugging information.
location
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 5.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeroot-system
Related Commands
DescriptionCommand
Enables traffic storm control on a bridge router, bridge port EFP,
or access pseudowire.
storm-control (l2vpn)
Displays the hardware location information on the ingress detail
location.
show l2vpn forwarding hardware ingress
detail location
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
246
Multipoint Layer 2 Services Commands
debug l2vpn forwarding platform vpls all location

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model