Cisco ASR 9000 Series - Instance (G.8032)

instance (G.8032)
To configure a G.8032 Ethernet ring instance and enter Ethernet ring G.8032 instance configuration submode,
use the instance command in the Ethernet ring G.8032 configuration submode. To disable the G.8032 Ethernet
ring instance, use the no form of this command.
instance instance-id
no instance instance-id
Syntax Description
Instance ID; currently, supports up to two instances per Ethernet ring. The
instance ID can be 1 or 2.
instance-id
Command Default
None
Command Modes
Ethernet ring G.8032 configuration submode
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writel2vpn
Examples
This example shows how to configure G.8032 Ethernet ring instance:
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# ethernet ring g8032 r1
RP/0/RSP0/CPU0:router(config-l2vpn-erp)# instance 1
RP/0/RSP0/CPU0:router(config-l2vpn-erp-instance)#
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
265
Multipoint Layer 2 Services Commands
instance (G.8032)