Cisco ASR 9000 Series Reference Guide

show evpn evi
To display the EVPN E-VPN ID information, use the show evpn evi command in the EXEC mode.
show evpn evi ac-id [bridge-domain | detail | inclusive-multicast | location | mac | standby | vpn-id ]
Syntax Description
Specifies the attachment circuit id.
ac-id
Displays information for a specified bridge-domain..bridge-domain
Displays detailed information.detail
Displays EVPN Inclusive Multicast information.inclusive-multicast
Displays location specific information.location
Displays EVI MAC route associated configuration information.mac
Displays standby node specific information.standby
Displays information for a specified E-VPN Identifier.vpn-id
Command Default
None.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.2
The variable ac-id was added
Release 6.0.0
The show command output is enhanced to display the Service Path
Preference parameters.
Release 6.1.2
Usage Guidelines
To use commands of this module, you must be in a user group associated with a task group that includes
appropriate task IDs. If the user group assignment is preventing you from using any command, contact your
AAA administrator for assistance.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
436
Provider Backbone Bridge Commands
show evpn evi

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model