Cisco ASR 9000 Series - Show L2 Vpn Forwarding Pbb Backbone-Source-Mac

show l2vpn forwarding pbb backbone-source-mac
To display the provider backbone source MAC forwarding information, use the show l2vpn forwarding pbb
backbone-source-mac command in EXEC mode.
show l2vpn forwarding pbb backbone-source-mac {debug [detail| location| private]| detail [debug|
location node-id]| location node-id| private}
Syntax Description
Displays the debug information.debug
Displays the detailed PBB forwarding information.detail
Specifies the location.location
Node ID.
node-id
Displays private information.private
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readl2vpn
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
451
Provider Backbone Bridge Commands
show l2vpn forwarding pbb backbone-source-mac