Cisco ASR 9000 Series - Description (G.8032)

description (G.8032)
To specify a string that serves as a description for a G.8032 Ethernet ring instance, use the description
command in the Ethernet ring G.8032 instance configuration submode.
description ring-instance-identifier
Syntax Description
A string that serves as a description for a G.8032 Ethernet ring instance.
The string can be a maximum of 32 characters.
ring-instance-identifier
Command Default
None
Command Modes
Ethernet ring G.8032 instance configuration submode
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writel2vpn
Examples
This example shows how to specify a description for G.8032 Ethernet ring instance:
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# ethernet ring g8032 r1
RP/0/RSP0/CPU0:router(config-l2vpn-erp)# instance 1
RP/0/RSP0/CPU0:router(config-l2vpn-erp-instance)# description test
RP/0/RSP0/CPU0:router(config-l2vpn-erp-instance)#
Related Commands
DescriptionCommand
Enters L2VPN configuration mode.l2vpn, on page 100
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
247
Multipoint Layer 2 Services Commands
description (G.8032)