Cisco ASR 9000 Series - Show L2 Vpn Forwarding Protection Main-Interface

show l2vpn forwarding protection main-interface
To display an overview of the main interface or instance operational information from L2Forwarding
Information Base (L2FIB), use the show l2vpn forwarding protection main-interface command in EXEC
mode.
show l2vpn forwarding protection main-interface [interface name] [detail| location| private]
Syntax Description
Interface name of the Ethernet ring G.8032 name.
interface name
Information in detail about the G.8032 ethernet
ring configuration.
detail
Brief information about the G.8032 ethernet ring
configuration.
location
Private information about the G.8032 ethernet ring
configuration.
private
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
This example shows the output from the show l2vpn forwarding protection main-interface command:
# show l2vpn forwarding protection main-interface location <r/s/i>
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
356
Multipoint Layer 2 Services Commands
show l2vpn forwarding protection main-interface