Cisco ASR 9000 Series Reference Guide

show l2vpn process fsm
To display the status of the l2vpn process finite state machine, use the show l2vpn process fsm command in
EXEC mode. It displays the current process role and state, NSR status, ISSU status, role change status, and
status of collaborators.
show l2vpn process fsm [location| standby]
Syntax Description
(Optional) Displays non-stop routing information for the specified location.location
(Optional) Displays Standby node specific information.standby
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 6.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
The following example displays output for the show l2vpn process fsm command:
RP/0/RSP0/CPU0:router# show l2vpn process fsm
Mon May 16 10:20:30.967 PDT
L2VPN Process FSM
Current process role : Primary Active (Master)
Current process state : Run
S/w install in progress : No
NSR Status:
NSR Ready : No
Last NSR Withdraw Time : Mon May 16 10:19:58 PDT 2016 (00:00:33 ago)
Standby Connected : No
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
191
Point to Point Layer 2 Services Commands
show l2vpn process fsm

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model