igmp snooping disable
To disable IGMP snooping on a bridge domain within the L2VPN, use the igmp snooping disable command
in the L2VPN bridge group bridge-domain configuration mode. To return to the default, use the no form of
this command.
igmp snooping disable
no igmp snooping disable
Syntax Description
This command has no keywords or arguments.
Command Default
IGMP snooping is active on a bridge domain when an IGMP snooping profile is configured to the bridge
domain.
Command Modes
L2VPN bridge group bridge domain configuration
Command History
ModificationRelease
This command was introduced.Release 5.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
This example shows how to disable IGMP snooping profile for a bridge domain in the L2VPN:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group 1
RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain bar
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# igmp snooping disable
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)#
Related Commands
DescriptionCommand
Enters L2VPN configuration mode.l2vpn, on page 100
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
261
Multipoint Layer 2 Services Commands
igmp snooping disable
To Next Page
Loading...
Need help?
General
