Cisco ASR 9000 Series - Page 274

Related Commands
DescriptionCommand
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
bridge-domain (VPLS), on page 240
Creates a bridge group so that it can contain bridge domains and then
to assign network interfaces to the bridge domain.
bridge group (VPLS), on page 242
Enters L2VPN configuration mode.l2vpn, on page 100
Adjusts the maximum packet size or maximum transmission unit
(MTU) size for the bridge domain.
mtu (VPLS), on page 289
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
260
Multipoint Layer 2 Services Commands
flooding unknown-unicast disable (VPLS)