Cisco ASR 9000 Series Reference Guide

show l2vpn bridge-domain (VPLS)
To display information for the bridge ports such as attachment circuits and pseudowires for the specific bridge
domains, use the show l2vpn bridge-domain command in EXEC mode.
show l2vpn bridge-domain [autodiscovery | bd-name bridge-domain-name | brief | detail | group
bridge-domain-group-name | hardware | interface type interface-path-id | pw-id value ] neighbor IP-address
[pw-id value | pbb | summary]
Syntax Description
(Optional) Displays BGP autodiscovery information.autodiscovery
(Optional) Displays filter information on the bridge-domain-name. The
bridge-domain-name argument is used to name a bridge domain.
bd-name
bridge-domain-name
(Optional) Displays brief information about the bridges.brief
(Optional) Displays detailed information about the bridges. Also, displays the
output for the Layer 2 VPN (L2VPN) to indicate whether or not the MAC
withdrawal feature is enabled and the number of MAC withdrawal messages
that are sent or received from the pseudowire.
detail
(Optional) Displays filter information on the bridge-domain group name. The
bridge-domain-group-name argument is used to name the bridge domain group.
group bridge-domain-
group-name
(Optional) Displays hardware information.hardware
(Optional) Displays the filter information for the interface on the bridge domain.
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
interface type
interface-path-id
(Optional) Displays the bridge domains that contain the pseudowires to match
the filter for the neighbor. The ip-address argument is used to specify IP address
of the neighbor.
neighbor ip-address
(Optional) Displays the filter for the pseudowire ID. The range is from 1 to
4294967295.
pw-id value
(Optional) Displays provider backbone bridge information.pbb
(Optional) Displays the summary information for the bridge domain.summary
Command Default
None
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
318
Multipoint Layer 2 Services Commands
show l2vpn bridge-domain (VPLS)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model