DescriptionCommand
Enables debugging protocol-state changes such as port role
or state changes, topology change notification.
debug spanning-tree mst protocol-state, on
page 481
Sets the bridge priority for the current MSTIpriority (MSTP), on page 564
Displays the multiple spanning tree protocol status
information.
show spanning-tree mst, on page 589
Enters the MSTP configuration submodespanning-tree mst, on page 623
Associates a set of VLAN IDs with the current MSTI.vlan-id (MSTP), on page 645
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
518
Multiple Spanning Tree Protocol Commands
instance (MSTP)
To Next Page
Loading...
