Command History
ModificationRelease
This command was introduced.Release 3.7.2
The following keywords were introduced:
•
debug
•
dhcp binding
•
ethernet ring g8032
•
gsp
•
l2tpv2
•
monitor-session
•
neighbor
•
object-queues
•
pbb
•
protection
Release 4.3.0
The pwgroup keyword was introduced.Release 5.1
The show command output was enhanced to display VXLAN anycast
gateway parameters.
Release 5.3.1
The show command output is enhanced to display MAC Move Counters
information.
Release 5.3.2
The show command output is enhanced to display the Service Path Preference
parameters.
Release 6.1.2
Usage Guidelines
To use commands of this module, you must be in a user group associated with a task group that includes
appropriate task IDs. If the user group assignment is preventing you from using any command, contact your
AAA administrator for assistance.
Task ID
OperationsTask ID
readl2vpn
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
172
Point to Point Layer 2 Services Commands
show l2vpn forwarding
To Next Page
Loading...
