Cisco ASR 9000 Series - Page 27

Example 1:
RP/0/RSP0/CPU0:router(config-if)# encapsulation untagged
Example 2:
RP/0/RSP0/CPU0:router(config)# interface GigabitEthernet 0/1/1/0.100 l2transport
RP/0/RSP0/CPU0:router(config-subif)# encapsulation untagged
Related Commands
DescriptionCommand
Configure the default service instance on a port.encapsulation default, on page 4
Defines the matching criteria to map 802.1Q frames ingress on
an interface to the appropriate service instance.
encapsulation dot1q, on page 8
Defines the matching criteria to map Q-in-Q ingress frames on
an interface to the appropriate service instance.
encapsulation dot1q second-dot1q, on page
10
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
13
Ethernet Interfaces Commands
encapsulation untagged