Cisco ASR 9000 Series Reference Guide

Related Commands
DescriptionCommand
Enters the MAC aging configuration submode to set the aging
parameters such as time and type.
aging (VPLS), on page 234
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
bridge-domain (VPLS), on page 240
Creates a bridge group so that it can contain bridge domains and
then to assign network interfaces to the bridge domain.
bridge group (VPLS), on page 242
Enters L2VPN configuration mode.l2vpn, on page 100
Overrides the MAC learning configuration of a parent bridge or sets
the MAC learning configuration of a bridge.
learning disable (VPLS), on page 271
Sets the MAC address limit for action, maximum, and notification
and enters L2VPN bridge group bridge domain MAC limit
configuration mode.
limit (VPLS), on page 275
Adds static entries to the MAC address for filtering.static-address (VPLS), on page 369
Disables MAC address withdrawal for a specified bridge domainwithdraw (VPLS), on page 382
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
278
Multipoint Layer 2 Services Commands
mac (VPLS)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model