Cisco ASR 9000 Series - Page 306

Related Commands
DescriptionCommand
Enables RSVP-TE as transport on a VFI.transport rsvp-te, on page 376
Configures virtual forwarding interface (VFI)
parameters.
vfi (VPLS), on page 380
Establishes a bridge domain and enters L2VPN
bridge group bridge domain configuration mode.
bridge-domain (VPLS), on page 240
Creates a bridge group so that it can contain bridge
domains and then to assign network interfaces to
the bridge domain.
bridge group (VPLS), on page 242
Enters L2VPN configuration mode.l2vpn, on page 100
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
292
Multipoint Layer 2 Services Commands
multicast p2mp