Cisco ASR 9000 Series Reference Guide

Examples
This example shows the output of the show ethernet ring g8032 command:
RP/0/RSP0/CPU0:router# show ethernet ring g8032 status
Ethernet ring Subring instance 1 is RPL Owner node in Protection state
Port0: Bundle-Ether100 (Monitor: Bundle-Ether100)
APS-Channel: Bundle-Ether100.1
Status: RPL, faulty, blocked
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
Port1: GigabitEthernet0/0/0/38 (Monitor: GigabitEthernet0/0/0/38)
APS-Channel: GigabitEthernet0/0/0/38.1
Status: NonRPL
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
APS Level: 7
Open APS ring topology
Profile: timer-wtr (not defined)
WTR interval: 5 minutes
Guard interval: 500 milliseconds
Hold-off interval: 0 seconds
Revertive mode
Ethernet ring Subring-2 instance 1 is RPL Owner node in Idle state
Port0: GigabitEthernet0/0/0/33 (Monitor: GigabitEthernet0/0/0/33)
APS-Channel: GigabitEthernet0/0/0/33.1
Status: RPL, blocked
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
Port1: GigabitEthernet0/0/0/3 (Monitor: GigabitEthernet0/0/0/3)
APS-Channel: GigabitEthernet0/0/0/3.1
Status: NonRPL
Remote R-APS NodeId: 0000.0000.0000, BPR: 0
APS Level: 7
Open APS ring topology
Profile: timer-wtr (not defined)
WTR interval: 5 minutes
Guard interval: 500 milliseconds
Hold-off interval: 0 seconds
Revertive mode
RP/0/RSP0/CPU0:router#
RP/0/RSP0/CPU0:router# show ethernet ring g8032 brief
Wed Mar 16 07:14:28.719 UTC
R: Interface is the RPL-link
F: Interface is faulty
B: Interface is blocked
FS: Local forced switch
MS: Local manual switch
RingName Inst NodeType NodeState Port0 Port1
--------------------------------------------------------------------------------
Subring 1 Owner Protection R,F,B
Subring-2 1 Owner Idle R,B
RP/0/RSP0/CPU0:F4-2-A9K#
RP/0/RSP0/CPU0:router# show ethernet ring g8032 summary
Wed Mar 16 07:14:52.419 UTC
Chassis Node Id 0026.982b.c6e7
States
-----------------------------
Init 0
Idle 1
Protection 1
Manual Switch 0
Forced Switch 0
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
316
Multipoint Layer 2 Services Commands
show ethernet ring g8032

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model