Cisco ASR 9000 Series Reference Guide

The detail keyword displays detailed information on the attachment circuits and pseudowires, and is meant
for field investigation by a specialized Cisco engineer.
All bridge ports in the bridge domain on that line card are displayed. Therefore, if the bridge domain
contains non-local bridge ports, those are displayed as well.
Note
Task ID
OperationsTask ID
readl2vpn
Examples
The following sample output shows bridge-domain information for location 0/1/CPU0 for IOS-XR 5.3.1 and
earlier releases:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain location 0/1/CPU0
Bridge-Domain Name ID Ports addr Flooding Learning State
-------------------------------- ------ ----- ------ -------- -------- ---------
g1:bd1
Bridge-domain name: g1:bd1, id: 0, state: up
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: yes
Security: disabled
DHCPv4 snooping: profile not known on this node
Bridge MTU: 1500 bytes
Number of bridge ports: 2
Number of MAC addresses: 65536
Multi-spanning tree instance: 0
GigabitEthernet0/1/0/0, state: oper up
Number of MAC: 32770
Sent(Packets/Bytes): 0/21838568
Received(Packets/Bytes): 5704781/444972918
Nbor 1.1.1.1 pw-id 1
Number of MAC: 32766
Sent(Packets/Bytes): 0/0
Received(Packets/Bytes): 5703987/444910986
0 2 65536 Enabled Enabled UP
The following sample output shows bridge-domain information for location 0/1/CPU0 for IOS-XR 5.3.2
release:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain location 0/1/CPU0
Bridge-Domain Name ID Ports addr Flooding Learning State
-------------------------------- ------ ----- ------ -------- -------- ---------
g1:bd1
Bridge-domain name: g1:bd1, id: 0, state: up
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
342
Multipoint Layer 2 Services Commands
show l2vpn forwarding bridge-domain (VPLS)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model