EasyManuals Logo

Cisco ASR 9000 Series Reference Guide

Cisco ASR 9000 Series
696 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #362 background imageLoading...
Page #362 background image
Command History
ModificationRelease
This command was introduced.Release 3.7.0
This command was introduced.Release 3.7.2
This command was introduced.Release 3.8.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readl2vpn
Examples
The following sample output shows the specified location of the bridge-domain name g1:bd1 for the MAC
address:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain g1:bd1 location 0/1/CPU0
Bridge MAC
Bridge-Domain Name ID Ports addr Flooding Learning State
-------------------------------- ------ ----- ------ -------- -------- ---------
g1:bd1 0 2 65536 Enabled Enabled UP
The following sample output shows the list of MAC addresses that are learned on a specified bridge and
summary information for the addresses:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain mac-address location 0/1/CPU0
Fri Mar 14 13:30:38.285 EST
To Resynchronize MAC table from the Network Processors, use the command...
l2vpn resynchronize forwarding mac-address-table location <r/s/i>
Mac Address Type Learned from/Filtered on LC learned Resync Age Mapped to
--------------------------------------------------------------------------------
0000.0001.0103 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s N/A
0000.0001.0104 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s N/A
0000.0001.0105 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s N/A
000b.6019.141b dynamic Gi0/1/0/8.10 0/1/CPU0 0d 0h 0m 2s N/A
000a.42db.e419 dynamic nve1 0/1/CPU0 0d 0h 0m 21s 55.55.55.53
0013.7faf.681b dynamic nve1 0/1/CPU0 0d 0h 0m 20s 55.55.55.51
....
The following sample output shows the MAC address on a specified interface on a specified bridge:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain g1:bd1 mac-address 1.2.3 location
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
348
Multipoint Layer 2 Services Commands
show l2vpn forwarding bridge-domain mac-address (VPLS)

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals