EasyManua.ls Logo

Cisco ASR 9000 Series - Page 365

Cisco ASR 9000 Series
696 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
L3 encapsulation Vlan = 1001
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain mac-address location 0/1/CPU0
Mac Address Type Learned from/Filtered on LC learned Age
--------------------------------------------------------------------------------
0000.0000.0000 static Gi0/1/0/0 N/A N/A
0000.0001.0101 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0102 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0103 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0104 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0105 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0106 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0107 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0108 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0109 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.010a dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.010b dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.010c dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.010d dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.010e dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.010f dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0110 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0111 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
0000.0001.0112 dynamic Gi0/1/0/0 0/1/CPU0 0d 0h 2m 22s
....
This example shows sample output of the show l2vpn forwarding bridge-domain mac-address location
command:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain mac-address location 0/1/CPU0
Mac Address Type Learned from/Filtered on LC learned Age Mapped to
--------------------------------------------------------------------------------
0002.0003.0004 filter bg1:bd1 N/A N/A
0002.0003.0005 filter bg1:bd1 N/A N/A
0002.0003.0006 filter bg1:bd1 N/A N/A
0002.0002.0002 static Gi0/0/0/0.1 N/A N/A
0333.0444.0555 static bg1:bd2 N/A N/A 0777.0888.0999
0444.0555.0666 static bg1:bd2 N/A N/A 0888.0999.0111
This example shows sample output of the show l2vpn forwarding bridge-domain mac-address detail
location command:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain mac-address detail location
0/1/CPU0
Bridge-domain name: bg1:bd1, id: 0, state: up
Type: pbb-edge, I-SID: 1234
Core-bridge: pbb-bd2
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4294967295, Action: none, Notification: syslog
MAC limit reached: no
Security: disabled
DHCPv4 snooping: profile not known on this node
IGMP snooping: disabled, flooding: disabled
Bridge MTU: 1500 bytes
Number of bridge ports: 2
Number of MAC addresses: 1
Multi-spanning tree instance: 0
PBB Edge, state: up
Number of MAC: 1
Mac Address: 0004.0005.0006, LC learned: N/A,
Mapping value: 0007.0008.0009
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
351
Multipoint Layer 2 Services Commands
show l2vpn forwarding bridge-domain mac-address (VPLS)

Table of Contents

Other manuals for Cisco ASR 9000 Series

Related product manuals