Cisco ASR 9000 Series Reference Guide

Examples
In the following example, the backbone source MAC address is set to 0045.1200.04:
config
l2vpn
pbb
backbone-source-mac 0045.1200.0400
!
!
This example shows how to set the backbone source MAC address in the EVPN Interface Ethernet segment
configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# evpn
RP/0/RSP0/CPU0:router(config-evpn)# interface bundle-ether 1
RP/0/RSP0/CPU0:router(config-evpn-ac)# ethernet segment
RP/0/RSP0/CPU0:router(config-evpn-ac-es)# backbone-source-mac 0045.1200.0400
RP/0/RSP0/CPU0:router(config-evpn-ac-es)#
Related Commands
DescriptionCommand
Configures the provider backbone bridge core or edge.pbb, on page 420
Enters EVPN configuration mode.evpn, on page 400
Enters the EVPN Interface configuration mode.interface (EVPN), on page 410
Enters EVPN interface ethernet segment configuration mode.ethernet-segment, on page 396
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
388
Provider Backbone Bridge Commands
backbone-source-mac

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model