Cisco ASR 9000 Series - Page 428

Examples
The following example shows how to set the leave-time on all active ports:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# mmrp-flood-optimization
RP/0/RSP0/CPU0:router(config-mmrp-flood-opt)# leave-time 80
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
414
Provider Backbone Bridge Commands
leave-time (PBB)