Cisco ASR 9000 Series - Page 442

RP/0/RSP0/CPU0:router(config-evpn-ac-timers)# recovery 50
RP/0/RSP0/CPU0:router(config-evpn-ac-timers)#
This example shows how to configure the recovery timer in the EVPN Timers configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# evpn
RP/0/RSP0/CPU0:router(config-evpn)# timers
RP/0/RSP0/CPU0:router(config-evpn-timers)# recovery 300
RP/0/RSP0/CPU0:router(config-evpn-timers)#
Related Commands
DescriptionCommand
Enters EVPN configuration mode.evpn, on page 400
Enters the EVPN Interface configuration mode.interface (EVPN), on page 410
Configures timers that affect the convergence of PBB EVPN
in failure scenarios.
timers, on page 458
Configures the MAC flushagain timer.flushagain, on page 404
Configures the peering timer.peering, on page 422
Configures the programming timer.programming, on page 425
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
428
Provider Backbone Bridge Commands
recovery