Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readethernet-services
Examples
The following example shows how to enable debugging of brief MVRP packets:
RP/0/RSP0/CPU0:router#debug ethernet mvrp packets brief
Thu Oct 28 02:56:35.048 DST
The following example shows how to enable debugging of full MVRP packets on a specific location:
RP/0/RSP0/CPU0:router#debug ethernet mvrp packets full location 0/0/CPU0
Mon Nov 15 20:02:13.636 PST
The following example shows how to enable debugging of brief MVRP packets received at a specific interface:
RP/0/RSP0/CPU0:router#debug ethernet mvrp packets brief direction received interface
gigabitEthernet 0/0/0/1
Thu Nov 25 21:09:01.986 PST
Related Commands
DescriptionCommand
Enables MVRP protocol debugging on a specific interface,
location or vlan.
debug ethernet mvrp protocol, on page 477
Enables Multiple VLAN Registration Protocol (MVRP) in static
mode.
mvrp static, on page 546
Displays the current state of the Multiple Registration Protocol
(MRP) Attribute Declaration (MAD) component on a port.
show ethernet mvrp mad, on page 579
Displays packet statistics per port.show ethernet mvrp statistics, on page 581
Displays a summary of the VIDs that are declared or registered.show ethernet mvrp status, on page 583
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
476
Multiple Spanning Tree Protocol Commands
debug ethernet mvrp packets
To Next Page
Loading...
Need help?
General
