Cisco ASR 9000 Series Reference Guide

Examples
The following example shows how to debug an ethernet mvrp protocol:
RP/0/RSP0/CPU0:router#debug ethernet mvrp protocol
Thu Oct 28 03:05:21.575 DST
RP/0/RSP0/CPU0:router#debug ethernet mvrp protocol location 0/0/CPU0
Mon Nov 15 20:11:56.607 PST
RP/0/RSP0/CPU0:router#debug ethernet mvrp protocol interface gigabitEthernet 0/0/0/1
Mon Nov 15 20:12:49.776 PST
Related Commands
DescriptionCommand
Enables debugging of sent and received MVRP packets.debug ethernet mvrp packets, on page 475
Enables Multiple VLAN Registration Protocol (MVRP) in
static mode.
mvrp static, on page 546
Displays the current state of the Multiple Registration Protocol
(MRP) Attribute Declaration (MAD) component on a port.
show ethernet mvrp mad, on page 579
Displays packet statistics per port.show ethernet mvrp statistics, on page 581
Displays a summary of the VIDs that are declared or registered.show ethernet mvrp status, on page 583
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
478
Multiple Spanning Tree Protocol Commands
debug ethernet mvrp protocol

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model